Stainless Steel Joint/Connector
|Stainless steel joint/connect
|Customized according to customer’s drawings or samples. Connector body + ferrule nut + double ferrule (front ferrule + rear ferrule)
|National standard: GB/T14976-2012
|201,304L,316,316L etc. Execute according to American standard
|1) Outer Diameter:+/-0.05mm
4）Ensure product concentricity
Hard tube：more than 330HV
|Shipbuilding, decoration, automobile manufacturing, food and medical equipment. , chemical machinery, refrigeration equipment, instrumentation, petrochemical, aviation, wire and cable etc.
|Stainless steel--water pressure test---loss thickness---washing---hot rolled---water pressure test---packaging
|Ni 8%~11%，Cr 18%~20%
|Salt spray test
|No rust within 72 hours
|ISO9001:2015 , CE
|200 Ton Per Month
|Plastic bag,Carton box, Wooden pallet, Wooden case,Woven belt, etc. (pls send me details if you have other requests)
|Support connect videos
|Available， some samples are free
The below table shows the chemical composition of the most used stainless steel pipes:
The stainless steel card sleeve joint has the characteristics of strong connection, high pressure resistance, temperature resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable work.
The fitting is composed of three parts: the fitting body, the fitting and the nut. When the sleeve and nut sleeve are inserted into the connector body on the steel pipe, the outer side of the front end of the sleeve fits the cone surface of the connector body when the nut is tightened, and the inner edge evenly bites into the seamless steel pipe to form an effective seal. The fitting has the characteristics of corrosion resistance, high pressure resistance, easy installation and durability.
The working principle of the sleeve joint is to insert the steel pipe into the sleeve, use the sleeve nut to lock, resist the sleeve, cut into the pipe and seal. It does not need welding when connected with steel pipe, which is conducive to fire prevention, explosion prevention and high altitude work, and can eliminate the disadvantages caused by careless welding. So it is oil refining, chemical, petroleum, natural gas, food, pharmaceutical, instrument and other system automatic control device pipeline in a more advanced connection. Suitable for oil, gas, water and other pipeline connection.
Can be used in vacuum and high pressure liquid systems. Can work at low temperature to ensure sealing. Clamp-sleeve fittings are permanently sealed at the highest rated temperature of the pipe. It can be disassembled repeatedly and sealed.
The clip sleeve pipe joint is the connection tool between the pipe and the pipe straight through the clip sleeve joint, is the connection point between the component and the pipe can be disassembled. It plays an indispensable role in pipe fitting. It is one of the two main components of hydraulic pipe.
There are many kinds of single card sleeve joint, and the commonly used card sleeve joint can be divided into hard card sleeve joint and soft card sleeve joint. If according to the connection mode of card sleeve type pipe joint and pipe, hard card sleeve type pipe joint has flamed type, card sleeve type and welding type three kinds, soft card sleeve type pipe joint is mainly squeezed rubber card sleeve type pipe joint.